Table of Contents
Advertisement
12.1.4. D
ISASSEMBLING THE LOWER CASING
Figure 12.1.4-1
Page 12.6
TOP 600 XTPRO: Service & Maintenance Manual - rev. 2.0
Carry out the procedure described in paragraph
7.6. "Disassembling the right and left side
casings".
1. Separate the seat assembly from the machine.
2. Back off the 4 screws a using a large Phillips
screwdriver.
3. Remove the lower casing.
To reassemble the lower casing, carry out the
above steps in reverse order.
- Quick Links:
- Introduction
- Mechanical Characteristics
Hide quick links:
Advertisement
Table of Contents
