Table of Contents
Advertisement
TOP 600 XTPRO: Service & Maintenance Manual - rev. 2.0
7.16. DISASSEMBLING THE ALTERNATOR BRUSHES
Figure 7.16-1
Carry out the procedures described in paragraph
7.6. "Disassembling the right and left side
casings".
1. Disconnect cable a from the alternator.
2. Back off the BRUSH group clamping screw
b using a medium Phillips screwdriver.
3. Remove the BRUSHES.
To reassemble the BRUSHES, carry out the
above steps in reverse order.
Page 7.17
- Quick Links:
- Introduction
- Mechanical Characteristics
Hide quick links:
Advertisement
Table of Contents
