Eliwell ICPlus 902 Manual page 3

Decimal Point
Permanently on: decimal point
Flashing: Soft Start active
Off: otherwise
Pressure
Permanently on: displays a pressure
Flashing: reduced set active and displays
a pressure
Relay OUT1
Permanently on: OUT1 output active
Flashing: a delay, a protection or a locked
start-up
Off: otherwise
Alarm
Permanently on: alarm active
Flashing: alarm acknowledged
Off: otherwise
ICONs
Temperature
Permanently on: displays a temperature
Flashing:
Humidity
Permanently on: displays a humidity
Flashing:
Not Used
NOTE:
When switched on, the device performs a Lamp Test; the
display and LEDs will flash for several seconds to check that
they all function correctly.
reduced set active, displays
a temperature or no unit of
measure selected
reduced set active and displays
a humidity