Table of Contents
Advertisement
The mAcal now measures the voltage shown in the display.
3.6
HOW NEW PARAMETERS ARE SELECTED (SETUP)
Press
Press
3.6.1 Selection of MODE
It is possible to choose between 5 different MODES:
4-20mA LIN
0-20mA LIN
4-20mA FLOW
0-20mA FLOW
4-20mA VALVE
LIN
-
% calculated linearly.
FLOW -
% calculated logarithmically.
VALVE -
% not calculated.
AUTO-STEP function 3.8 - 4 - 4.2 - 4..... or 19 - 20 - 21 - 20..... mA.
Press
Press
3.6.2 Selection of SLOPE TIME
After MODE has been selected, SLOP TIME (ramp time in the case of AUTO) can be
changed.
The text
Press
adjusted between 30 - 999 S.
8
for approx. 2 seconds. The present selection of
MODE is now shown in the display, e.g.
to cancel a selection. SETUP is exited and it is necessary to
start all over again. This option can be selected at any time.
or
to save the present selection.
s is shown on the display for approx. 1 second.
or
mA.
for selection of new MODE.
for setting of SLOPE TIME. The time can be
103887 01
Advertisement
Table of Contents
