Analysis Sequence - Micromeritics TriStar II 3020 Service Manual

TriStar II 3020 Service

Analysis Sequence

1. Create and save up to three sample files for use during an analysis.
2. Place a plug in any port that is not being used for analysis.
3. Prepare samples to be analyzed. This may include weighing the sample and degassing the
sample.
4. Load sample tubes in their respective ports and fill the Dewar.
5. Select Unit n > Sample Analysis > Browse to load the newly created sample file for each
port.
6. Select
Start
Jul 09
to begin the analysis.
Analysis Sequence
3-3