Setup (Menu) Mode - Yaesu FT-891 Operating Manual

Setup (Menu) Mode

The FT-891 Setup (Menu) mode, already described in parts of many previous chapters,
is easy to activate and setup. The Menus may be used to configure many of transceiver
parameters, some of which have not been detailed previously.
procedure to activate the Setup (Menu) mode:
1. Press and hold in the [ F ] key for one second
to activate the Menu mode.
2. Rotate the MULTI knob to select the Menu
Item to be adjusted.
3. Press the MULTI knob momentarily to en-
able adjustment of the selected Menu item,
and then rotate the MULTI knob to perform
the actual adjustment.
4. After completing the selection and adjust-
ment, press the [ F ] key to exit the Setup
menu and resume normal operation.
Menu / Item
AGC
01-01 AGC FAST DELAY
01-02 AGC MID DELAY
01-03 AGC SLOW DELAY
DISPLAY
02-01 MY CALL
02-02 MY CALL INDI
02-03 LCD CONTRAST
02-04 DIMMER BACKLIT
02-05 DIMMER LCD
02-06 DIMMER TX/BUSY
02-07 PEAK HOLD
02-08 ZIN LED
DVS
03-01 DVS RX OUT LEVEL
03-02 DVS TX OUT LEVEL
KEYER
04-01 KEYER TYPE
04-02 KEYER DOT/DASH
04-03 CW WEIGHT
04-04 BEACON INTERVAL
04-05 NUMBER STYLE
04-06 CONTEST NUMBER
04-07 CW MEMORY 1
04-08 CW MEMORY 2
04-09 CW MEMORY 3
04-10 CW MEMORY 4
04-11 CW MEMORY 5
26
FCC ID: K6620651X50 / IC: 511B-20651X50
Available Values
20 - 4000 msec
20 - 4000 msec
20 - 4000 msec
---
0 - 5
1 - 15
1 - 4
1 - 15
1 - 4
OFF/0.5/1.0/2.0 sec
ENABLE/DISABLE
0 - 100
0 - 100
OFF/BUG/ELEKEY-A/
ELEKEY-B/ELEKEY-Y/ACS
NOR/REV
2.5 - 4.5
OFF/1 - 690 sec
1290/AUNO/AUNT/A2NO/
A2NT/12NO/12NT
0 - 9999
TEXT/MESSAGE
TEXT/MESSAGE
TEXT/MESSAGE
TEXT/MESSAGE
TEXT/MESSAGE
FT-891 Operating Manual
Application for FCC / IC
Use the following
Default
300
700
3000
FT-891
1sec
8
8
8
8
OFF
ENABLE
50
50
ELEKEY-B
NOR
3.0
OFF
1290
1
TEXT
TEXT
TEXT
TEXT
TEXT