Loading Labels For Peel-Off Mode - CAB MACH 4.3S/200B Operator's Manual

4 Loading Material
14
4.3

Loading Labels for Peel-off Mode

!
Attention!
Place the printer so that the liner can run down without hindrance.
A label jam can cause malfunctions in printing operations.
1
Pressure roller in parking position
Figure 13
 Move the pressure roller (2) of the control panel (1) from the parking into the working position.
In order to achieve this use on both ends of the roller and guide it into the working position.
1
Figure 14
 Load labels  4.1 on page 11 or 4.2 on page 13.
 Remove the labels from the first 15 cm of the material.
 Feed the liner (3) out between the control panel (1) and the printer.
 Lock the control panel into place and close the cover.
 Initiate a synchronization  5.1 on page 18.
2
Activation of the pressure roller
3
Loading labels for peel-off mode
2
Pressure roller in working position
14