Device Dimensions - CAB MACH 4.3S/200B Operator's Manual

8 Media
8.2

Device Dimensions

Gap sensors
Reflective sensor
Printhead
Peel-off edge
Cut edge
Tear bar
Figure 24 Device dimensions
Dim. Designation
IP Distance printhead - peel-off edge
IC Distance printhead - cut edge
IT Distance printhead - tear bar
K Print width
Distance reflective sensor - middle of paper track
RX
i.e. permissible distance of reflex or cut-out marks from the middle of the material
Distance reflective sensor - printhead
RY
TX Distance gap sensor - middle of paper track
TX1 : Sensor for single and multi-lane labels with an odd number of lanes.
TX2 : Sensor for multi-lane labels with an even number of lanes.
TY Distance gap sensor - printhead
Table 9 Device dimensions
with printhead 4.3/200
with printhead 4.3/300
with printhead 4/300
with printhead 4/600
25
Dim. in mm
13,2
17,5
24,0
104,0
108,4
105,6
105,6
-56 - +10
16,0
0
-10
56,5