Loading Fanfold Labels - CAB MACH 4.3S/200B Operator's Manual

4 Loading Material
4.2 Loading Fanfold Media
1
2
Figure 12

Loading fanfold labels

 Stack the labels (2) behind the printer. Ensure that the labels on the strip are facing upwards.
 Open the cover and unlock and lower the control panel.
 Feed the media underneath the cover (1) into the printer.
 Remove the adapters from the margin stops  4.1.1 on page 11 and place the roll retainer with margin stops
into the printer.
 Feed the labels between the margin stops (3, 5) over the roll retainer (4).
 Push down the lever (6) and slide the margin stops (3,5) against the label edges.
The labels are centered automatically.
 Insert the labels into the transport module  4.1.3 on page 12.
3
4
13
5
6