Connection Overview; Connecting To Your Pc - Silvercrest 274142 User Manual And Service Information

Table of Contents

Advertisement

Available languages

Available languages

SilverCrest USB 2.0 Video Grabber SVG 2.0 A3
English

Connection overview

Connect the adapter (5) to the video grabber (1). Insert the adapter into the jack at the back of the
video grabber (see diagram).
Video grabber
Adapter
1
Snapshot button
S-Video input
Stereo audio input (white/red)
Composite video input (yellow)

Connecting to your PC

In order to record with the video grabber, you must first install the software (POWERDIRECTOR). If
you haven't already done so, go to the section entitled "Installing the software" and follow the
instructions.
 Connect the adapter (5) to the video grabber (1) as shown in the previous diagram.
1
This button generates a snapshot (photo of the current video) when the recording mode of the
enclosed PowerDirector software is activated.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usb video grabber svg 2.0 a3

Table of Contents