Changing Windows Firewall Settings; To Give Other Applications/Ports Access Through The Firewall - Keysight 16801A Installation And Quick Start Manual

Changing Windows Firewall Settings

To give other applications/ports access through the firewall

Keysight 16800 Series Portable Logic Analyzers Installation/Quick Start Guide
When 16800 Series logic analyzers are shipped from the factory, the
Windows Firewall is enabled and set up with the exceptions required by
the logic analyzer.
For example, you may need to change firewall settings in order to:
• Use NetOp to remotely control the logic analyzer.
• Use RealVNC to remotely control the logic analyzer.
On Windows XP
To change firewall settings to give other applications/ports access:
1 From the Windows Start menu, choose Start>Control Panel.
2 In the Control Panel window, open Windows Firewall.
Updating the Logic Analyzer 3
35