Table of Contents
Advertisement
2
Getting Started with the Logic Analyzer
To power off the system
Using the Windows Shutdown
Using a Short Press of the Power Button
28
You can power off the logic analyzer using Windows Shutdown or a short
press of the power button.
When powering off the logic analyzer, wait until the fans stop turning
NOTE
(about 15 seconds) before turning the logic analyzer back on. This
ensures that internal circuitry restarts in a known state.
On the logic analyzer desktop click Start>Shut Down or if you are running
remote desktop, click Start>Windows Security>Shut Down. This:
•
Closes all programs that are running.
•
Writes all data to the disk.
•
Turns off the power supply.
•
If the system is unplugged while it is off and then plugged back in, the
system will not power on until the power button is pressed.
Pressing the power button on the logic analyzer for a short time (less than
2 seconds):
•
Closes all programs that are running.
•
Writes all data to the disk.
•
Turns off the power supply.
If the power button on the Remote Desktop is depressed for a short time
(less than 2 seconds or so), a message on the logic analyzer screen (not on
the remote desktop) will pop up asking if you really want to power down.
Clicking the 'yes' button results in the above events. Clicking 'no' will
prevent the shutdown. Not answering the dialog box (clicking neither "Yes"
nor "No") will have no effect. Further short presses on the power button
will have no effect.
Keysight 16800 Series Portable Logic Analyzers Installation/Quick Start Guide
Hide quick links:
Advertisement
Table of Contents
