Table of Contents
Advertisement
Installation and Reference Manual – What's New
9
From the navigation pane select Trunks
10
Select the Module created above
11
From the Trunks List select Virtual
12
In the Presentation Number field enter the number to be sent on this Trunk. (This may be the
account number supplied by the SIP provider.)
13
Select Apply
14
Select the DDI Call Plan field
15
From the Select DDI Plan list select the DDI Plan required
16
In the Capacity field enter the number of connections to be allowed on this link.
17
Select Apply
18
Select the SIP page
19
From the Compression Type list box select
a
G729A 8K – if supported by the SIP Provider, or
b
Relay – for G711
20
In the NAT Server field enter
a
the IP address allocated by the ADSL provider, or
b
if using STUN, the name of the STUN server (provided by the SIP provider)
21
In the NAT Port field enter
5060
a
, or
3478
b
- if using STUN
22
From the NatMode field select Static or STUN
23
If a Registration DNS/IPAddress, User Name and Password have been supplied by the SIP provider
enter this information in the relevant fields otherwise leave the fields blank.
12
Installation and Reference Manual v3.2/0912/8
What's New
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PCS 582G and is the answer not in the manual?