Adding Multiple Ts Sources - ATX DigiVu II MICRO Operation Manual

7. With input source selected in Tree View, added program is displayed under the MUX, Figure 1-11.
9.5

Adding Multiple TS Sources

Multiple input TS sources and programs may be added to any MUX up to the bitrate specified for the MUX, Figure 1-12.
1. Add more new TS Sources to a MUX, see
2. For each TS Source, add program(s) to the source, see
• Only the bitrate of added programs counts toward filling the output MUX.
VersAtive Pro, DigiVu II, DigiVu
® ®
Figure 1-11: Added Program is Displayed under TS Source
Figure 1-12: Added Program Displayed under TS Source
II Micro – Operation Manual
®
"9.3 Create a TS Source" on page
"9.4 Adding TS Source Programs" on page 9-4.
CHAPTER 1: ETHERNET MULTIPLEXER
9-3.
9-5