ATX DigiVu II MICRO Operation Manual page 16

CHAPTER 1: GUI ENVIRONMENT
11. Click the Publish in the Tree View to open the Publish parameters window, Figure 1-13.
12. Next, Tick the box of the Connection to be edited.
13. Click Edit to enable changing the IP address.
14. Next, Edit the IP address to the correct value for this publish.
15. Click Apply to apply the change to the connection.
16. Click Save to save the changes.
1-10
Figure 1-13: Update Copied Publish Parameters
VersAtive Pro, DigiVu II, DigiVu
® ®
II Micro – Operation Manual
®