Meter Display Features - Fluke MultiFiber Pro Getting Started Manual

MultiFiber Pro Getting Started Guide

Meter Display Features


Modes for the meter and settings for tests. To select the
POWER, SET REF, or LOSS measurement modes, press
To change settings for measurements or to view records,
hold down
make selections.
 POWER: Use this mode to measure optical power. See
"How to Measure Optical Power" on page 10.
 SET REF: Use this mode to set the reference for loss
measurements. See "Set the Reference" on page 11.
 LOSS: Use this mode to measure loss. See "Measure Loss"
on page 14.
 LOSS LIMIT: Use this mode to set the limit for loss
measurements. See "Set the Limit" on page 13.
 VIEW RECORD: Use this mode to see and delete saved
results. See "Memory Functions" on page 16.
4

for 2.5 seconds, then use
 
and
GUE03.EPS

.
to