Polarity Detection; Auto Wavelength Function; How To Clean Mtp/Mpo Connectors - Fluke MultiFiber Pro Getting Started Manual









Polarity Detection

You can use the MultiFiber Pro meter and source to see the
polarity of MTP/MPO patch cords and cables. The signals from
the source include the channel numbers. The meter compares
the transmitted numbers to the numbers of the channels that
received the signals. The meter can then show the polarity of
the connections. See item

Auto Wavelength Function

The signal from the source includes an identifier that tells the
meter which wavelength to measure. The source transmits the
auto wavelength signal unless it is in 2 kHz mode. When you
select 2 kHz mode, the source's AUTO
changes to OFF.

How to Clean MTP/MPO Connectors

Always clean and inspect endfaces in fiber connectors before
you make connections. Fluke Networks recommends that you
use a mechanical cleaner, such as the Fluke Networks IBC
OneClick Cleaner, to clean connectors.
Meter only: Month (

hour ( ), and minutes (
the date and time with measurements you save.
The hour is in 24-hour format. To see the date
and time in saved records, look at the records in
LinkWare PC software.

: The software version number.

: Meter only. The factory calibration date.

), day (


on page 5.

Polarity Detection

), year (
). The meter includes
setting automatically

),
™
9