View Measured Values; Setpoints - View And Change - ComAp INTELICOMPACT-NT Operator's Manual

2.4 View measured values

Press button repeatedly until you see the main screen with the kW meter and mode selector.
Then press or
M
AIN SCREEN

2.5 Setpoints - view and change

1. Press button repeatedly until you see a screen with a list of setpoint groups. Then select
desired group by pressing the
continue into the selected group.
2. Now you will see the list of setpoints which belong to the selected group together with their
current setting. Use the
and press .
3. The current value of the setpoint will appear in the right part under the setpoint name and you
can change it by pressing
accelerate when the button is held down
4. Press button to confirm the change or
setpoints of the selected group.
5. Continue with change of another setpoint or press
L
IST OF GROUPS OF SETPOINTS
I C -NT, SW
NTELI OMPACT
to select a requested screen within the measurement page.
or
or buttons again to select the setpoint you want to modify
or buttons. The rate of changing the value will
1.3, ©C A – S
VERSION OM P
buttons and finally press
to discard it and return to the list of
to return to the list of groups.
2011 R
EPTEMBER EFERENCE
button to
G . 8
UIDE PDF