Controller Information Screen - ComAp INTELICOMPACT-NT Operator's Manual

N :
OTE
Lost password? Display the information screen which contains the serial number and a password
decode number as is described in the chapter below. Write down both numbers and send a request to
retrieve the passord to your local distributor containing these two numbers. You can also save and
send an archive instead.

2.9 Controller information screen

1. Press the button repeatedly until you will see the main controller screen with the mode
selector and kW analog meter.
2. Hold down the
information screen.
3. The information screen will
4. Press the button
5. Press the button
screen also contains serial number and password decode number.
6. Next pressing of the button
7. Press the button
I C -NT, SW
NTELI OMPACT
button and simultaneously press the button
disappear automatically after 5 secs
again within 5s to switch to language selection screen.
again to switch to the user interface mode selection screen. This
switches back to the information screen.
to get back to the controller main screen.
1.3, ©C A – S
VERSION OM P
2011 R
EPTEMBER EFERENCE
to see the controller
G . 11
UIDE PDF