Controller Language Selection; User Interface Mode Selection; Display Contrast Adjustment - ComAp INTELICOMPACT-NT Operator's Manual

2.10 Controller language selection

There are two languages available in the controller. Default languages are English and Chinese. The
languages can be changed or modified during the configuration in LiteEdit. Please see the LiteEdit
documentation for details.
To switch the controller language:
1. Display the information screen as described above.
2. While the information screen is still displayed, press the
3. Language menu will appear, use
4. Press to confirm the selection.

2.11 User interface mode selection

To switch the User interface mode, follow instructions below:
1. Display the information screen as described above.
2. While the information screen is still displayed, press the
3. User interface mode menu will appear, use
(User or Engineer).
4. Press to confirm the selection.

2.12 Display contrast adjustment

1. Press the button repeatedly until you will see the main controller screen with the mode
selector and kW analog meter.
2. Hold down the
increase or decrease the contrast.
I C -NT, SW
NTELI OMPACT
or
button and simultaneously press button
1.3, ©C A – S
VERSION OM P
button.
buttons to select the desired language.
button twice.
or buttons to select the desired mode
or
2011 R
EPTEMBER EFERENCE
repeatedly to
G . 13
UIDE PDF