The Simulator - Raymarine A60 Owner's Handbook Manual

18
12nm
Position
FISHFINDER
FISHFINDER
SETTINGS. . .
SETTINGS. . .

1.4 The Simulator

The A60 display includes a simulator mode, with which you can practice operating
your display without data from a GPS antenna or a DSM. Before installation,
connect the display to a 12VDC power supply, fused at 4 amps by attaching the
red wire from the power lead to positive (+) and the black lead to negative (–).
The simulator mode is switched on/off in the System Setup Menu.
1. Press MENU. The main Setup window is displayed.
2. Use the trackpad (up/down) or rotary knob to highlight System Setup.
3. Press the trackpad (right) to select.
4. Use the trackpad (up/down) or rotary knob to highlight Simulator.
5. Press the trackpad (right) to select.
6. Press the trackpad (up/down) to highlight ON.
7. Press ENTER to accept.
8. Press CANCEL twice to return to the display screen.
The SIMULATOR message flashes at the top of the screen and simulated data is
displayed.
N-UP RM
N 26°39.618 W 078°31.961
38
64
ZOOM . . .
ZOOM . . .
A60 Dual Function Display
200 kHz
58 . 8
BOTTOM
BOTTOM
A-SCOPE . . .
A-SCOPE . . .
LOCK . . .
LOCK . . .
0
20
40
ft
60
PRESENT . . .
PRESENT . . .