Raymarine A60 Owner's Handbook Manual page 89

Chapter 4: Using the Chartplotter
Trackpad controls
highlighted field
All existing waypoints
Waypoints in this route
4. Use the trackpad (right) to move control from the left (Waypoint) column to
the right (New Route) column.
5. Use the trackpad (up) to move the highlight immediately below where you
want the new waypoint inserted. The route follows the waypoints listed in this
column in order, from top to bottom.
6. Move control back to the left column and select the waypoint that is to be
added to your route.
7. Press INSERT WAYPOINT. The waypoint is added.
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013
N 25 34.521
W 079 01.755
ENTER
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
then
WPT 0013
ENTER
N 25 34.521
W 079 01.755
WPT 0008
ENTER
WPT 0009
WPT 0010
then
WPT 0011
WPT 0012
WPT 0013
ENTER
N 25 28.205
W 079 39.759
Make Route
Make Route
WPT 0008
WPT 0009
WPT 0011
Make Route
Make Route
WPT 0008
WPT 0009
WPT 0011
N 25 33.055
W 079 56.151
Make Route
Make Route
WPT 0008
WPT 0009
WPT 0011
N 25 33.055
W 079 56.151
89