Using The Route List; Advance To The Next Waypoint Within A Route - Raymarine A60 Owner's Handbook Manual

Chapter 4: Using the Chartplotter

Using the Route List

This option directs you to the start of the route that you have selected on the route
list and then follows it:
ROUTES . . .
1. Press ROUTES.
2. Press FOLLOW RTE OPTIONS. The route list is displayed.
3. Select the appropriate route on the list.
4. Press FOLLOW ROUTE.
5. To stop following an active route at any time, press STOP FOLLOW.
Note: This option can also be accessed via the GOTO soft key.

Advance to the Next Waypoint within a Route

FOLLOW RTE
OPTIONS. . .
GOTO . . .
GOTO WPT
OPTIONS. . .
By default, you are advanced to the next waypoint in the route as soon as the
Arrival Alarm sounds, signifying that you have travelled within the arrival radius
of the target waypoint. If you require more precise route control, you can select
the manual waypoint advance feature in the Alarm Setup menu (see page 36).
When set to MANUAL, you must acknowledge the alarm and then press
WAYPOINT ADVANCE before continuing to the next waypoint. When following a
route, the WAYPOINT ADVANCE soft key is available:
• by pressing ROUTES and then FOLLOW RTE OPTIONS
• by pressing GOTO
• by pressing the WPTS key and then GOTO WPT OPTIONS soft key
• when the Temperature Graph page is active
FOLLOW RTE
-or-
-or-
OPTIONS. . .
WAYPOINT
ADVANCE
83