Alarm Setup Menu; Navigation Alarms Setup - Raymarine A60 Owner's Handbook Manual

36

2.9 Alarm Setup Menu

You receive warnings of hazards via built-in alarms that are generated for each
application. If an alarm is generated, it sounds an audible warning and displays a
message box on screen that explains the cause of the alarm. In some cases, the
appropriate action is taken. For example, following an arrival alarm, the next
route leg is activated (if Waypoint Advance is set to AUTO).
The Alarm Setup Menu is divided into these sub-menus:

• Navigation Alarms Setup

• Fishfinder Alarms Setup (described in the DSM25 Handbook)
Note: To silence any alarm, press any key.
Navigation Alarms Setup
Navigation alarms will sound in any application when you are navigating.
FUNCTION
Description
Arrival Alarm Radius
The distance from the target waypoint or the closest point of
approach to the target waypoint that triggers the Arrival Alarm to
sound.
Waypoint Advance
When within the arrival radius of the target waypoint, this setting
determines whether you must manually press a key in order to con-
tinue to the next waypoint in the route. If set to AUTO, you are
advanced to the next waypoint in the route as soon as the waypoint
arrival alarm sounds. (You still must acknowledge the alarm.) If set to
MANUAL, you must acknowledge the alarm and press WAYPOINT
ADVANCE before continuing to the next waypoint. See "Advance to
the Next Waypoint within a Route" on page 83.
Anchor Alarm
Switches the anchor alarm on or off.
Anchor Alarm Radius
If the Anchor Alarm is set to ON, an alarm is triggered when you drift
from your anchor position by more than the specified distance.
A60 Dual Function Display
OPTIONS
bold
(Default in
0.10nm
0.01–9.99 nm
(or equivalent in
the selected
Distance Unit)
AUTO
MANUAL
OFF
ON
0.10nm
0.01–9.99 nm
(or equivalent in
the selected
Distance Unit)
)