Model Designations And Specifications; Model Designations - Siemens 7MF4033 series User Manual

UMSITRAPDS3-1

9.0 MODEL DESIGNATIONS AND SPECIFICATIONS

This section contains the model designation tables, a comprehensive accessory list, functional and
performance specifications, and hazardous area classifications for SITRANS P Series DSIII Pressure
Transmitters.
Before installing, calibrating, troubleshooting or servicing a transmitter, review
this section carefully for applicable specifications and hazardous area
classifications.

9.1 MODEL DESIGNATIONS

Tables 9-1 through 9-6 identify each entry on a
transmitter's rating and approval plates. These plates
carry important transmitter information:
•
Model number and serial number (Rating Plate)
•
Materials of construction (Rating Plate)
•
Span and rated pressure (Rating Plate)
•
Certifications (Approval Plate)
•
User-supplied Tag (Tag Plate)
Service Parts
Tables 9-7 through 9-13 identify service parts.
Before installing, applying or removing power, configuring, or servicing, confirm
transmitter model by referring to the transmitter's model designation on its rating
plate and in Tables 9-1 through 9-6.
The table below is an overview of measurement categories and available models. For details pertaining to
a model, see its model designation table and its specification table later in this section.
Measurement
Absolute or Gauge
Pressure
Differential Pressure
Level (Flange)
November 2005
Important
Important
Models Model Designation
7MF4033 Table 9-1
7MF4233 Table 9-2
7MF4333 Table 9-3
7MF4433 Table 9-4
7MF4533 Table 9-5
7MF4633 Table 9-6
7MF4912 Table 9-6
Model Designations and Specifications
+
1
1. Rating Plate
2. Approval Plate
3. Tag Plate
Specifications Dimensions
Table 9-15
Table 9-16
Table 9-16
Table 9-15 Figure 9-2 or 9-3
Table 9-15 Figure 9-2 or 9-3
Table 9-16
Table 9-16
+
2
3
Figure 9-1
Figure 9-1
Figure 9-2
Figure 9-4
Figure 9-4
9-1