Siemens 7MF4033 series User Manual page 164

UMSITRAPDS3-1
Other versions
- PTFE (Teflon)
- FEP (with silicone core, foodstuff compatible)
- FFPM (Kalrez)
- NBR (buna N)
Han 7D plug (metal, gray)
Han 8U plug (instead of Han 7D)
Sealing screw (1/4-18 NPT) with valve in the same material as
the process flanges
Labeling of the rating plate (instead of German):
- English
- French
- Spanish
- Italian
Manufacturer test certificate M according to DIN 55350, Part 18,
and according to ISO 8402
Acceptance test certificate B according to DIN 50 049 / EN 10 204-3.1 B
Works certificate according to DIN 50 049-2.2 / EN 10 204-2.2
Setting the upper output signal limit to 22.0 mA
Acid gas version according to NACE, only with Hastelloy process
diaphragm and stainless steel process flanges, PN 4569 psi
Stainless steel process flange screws, PN 6090 psi, basic device with
machined stainless steel process flange screws
IP 68 (not with Han 7D/Han 8U plug and cable screwed gland Pg 13.5)
Application in zone 0 (basic device EEx ia)
Switching the process connection side
Lateral vent for gas measurement
Stainless steel process flanges for vertical active pressure lines
Measuring range to be set, specify in clear text,
For linear characteristic: ... to ... mbar, psi, kPa, MPa, ... (27 characters
maximum)
For square root characteristic: 0 to ... mbar, psi, kPa, MPa, ..(27 characters
m )
aximum
Tag number / description (16 characters maximum) specify in clear text:
Tag message (27 characters
Setting digital display, specify in clear text: mbar, psi, kPa, MPa, ...
Factory pre-settings other than "Y01" or "Y02", "Y20" or "D05" are not possible.
Notes:
1)
Only with span D, F, G, or H; maximum PN 4569 psi and only with stainless steel process flange screws
2)
Without cable screwed gland
3)
Not with "explosion proof" degree of protection
4)
Not FM approved
Scope of delivery: Transmitter as ordered, 1 brief instruction (Leporello)
2 sealing screws (same material as process flanges)
Ordering example:
Position line: 7MF4533-1DA10-1AA1-Z
B-line: Y01
C-line: Y01: 36.1... 57.4 inH O
2
November 2005
4)
4)
4)
maximum ) specify in clear text:
Model Designations and Specifications
A20
A21
A22
A23
A30
A31
A40
B11
B12
B13
B14
C11
C12
C14
D05
maximum
D07
D09
D12
E02
H01
H02
H03
Y01
Y02
Y15
Y16
Y20
9-11