Siemens 7MF4033 series User Manual page 162

UMSITRAPDS3-1
Other versions
Add "-Z" to order number and add short spec.
Transmitter with mounting bracket of:
- steel
- stainless steel
Process flange O-ring (instead of FPM (Viton)) of:
- PTFE (Teflon)
- FEP (with silicone core, foodstuff compatible)
- FFPM (Kalrez)
- NBR (buna N)
6)
Han 7D plug
Han 8U plug (instead of Han 7D)
Sealing screws (1/4-18 NPT) with valve in same material as process flanges
Labeling of rating plate (instead of German):
- English
- French
- Spanish
- Italian
Manufacturer test certificate M acc. To DIN 55350, Part 18, and acc. to ISO 8402
Acceptance test certificate B acc. to DIN 50 049 / EN 10 204-3.1 B
Works certificate acc. To DIN 50 049-2.2 / EN 10 204-2.2
Setting the upper output current limit to 22.0 mA
Acid gas version acc. To NACE only with Hastelloy process diaphragm and
stainless steel process flange screws
IP 68 (not with Han 7D/Han 8U plug and cable screwed gland Pg 13.5)
Application in zone 0 (basic device EEx ia)
Overfill protection for combustible and non-combustible liquids
(PN 470 psi maximum) (basic device EEx ia)
Oxygen application (for oxygen measurement and inert liquid: 2325 psi maximum)
Switching the process connection side (HP side: left, LP side: right)
Lateral vent for gas measurement
Stainless steel process flanges for vertical active pressure lines (not with supplements K01 or
K02)
Process flanges:
- without process flanges
- Hastelloy flanges
- Monel flanges
Measuring range to be set, specify in clear text,
For linear characteristic: ... to ... mbar, psi, kPa, MPa, ... (27 characters
For square root characteristic: 0 to ... mbar, psi, kPa, MPa, ... (27 characters
Tag number / description (16 characters maximum) specify in clear text:
Tag message (27 characters maximum) specify in clear text:
Setting digital display specify in clear text: mbar, psi, kPa, MPa, ...
Factory presettings other than "Y01" or "Y02", "Y20" and "D05" are not possible.
Notes:
1)
Not suitable for remote process mounting
2)
Only with span D, F, G, or H
3)
For stainless steel process flange screws
4)
Without cable screwed gland
Scope of delivery:
Transmitter as ordered, 1 brief instruction (Leporello)
2 sealing screws (same material as process flange)
November 2005
6)
6)
Model Designations and Specifications
7MF4433 - . . . . . - . . . . – Z
A01
A02
A20
A21
A22
A23
A30
A31
A40
B11
B12
B13
B14
C11
C12
C14
D05
D07
D12
E02
E08
E10
H01
H02
H03
K00
K01
K02
)
maximum
Y01
)
maximum
Y02
Y15
Y16
Y20
5)
Not for "explosion proof" degree of protection
6)
Not FM approved
7)
Not with K01 or K02
Ordering example:
Position line: 7MF9933-1DA00-1AA1-Z
B-line: A01+B11+C14+Y01+Y15
C-line: Y01: 50...150 inH O
2
C-line: Y15: PIC 1758
9-9