Table of Contents
Advertisement
Main nominal Level
• If you select the analogue mode for input or output, the corresponding
slide controller is displayed to set the nominal Audio level of the XLR Au-
dio interfaces (Main Nominal Level). The main nominal level can be ad-
justed within a range of -3 ... +9 dBu in steps of 1-dB. The headroom is 6
dB. If you want to have the maximum level of 15 dBu for the system, you
need to set 9 dBu as main nominal level. The default setting is 0 dBu.
Audio Level Alarm
The Audio Level Alarm function checks the level at the Audio output of the
MAGIC AD1 ETI Decoder. If the audio level falls below a certain threshold
value for an indicated time interval, the alarm will be set (see CHAPTER 4.9.1,
Page 59). The threshold value can be selected under Threshold. The time
frame can be set under Interval.
4.7.2.2.3
LAN Interface
Under LAN Interface you ned to enter the configuration details of the LAN
interface.
FIG. 21
W i n d o w s
LAN INTERFACE
P C
S o f t w a r e
P A G E 4 5
Advertisement
Table of Contents
