Subchannels; Decoder Status - AVT MAGIC AD1 ETI Hardware Manual

W i n d o w s P C S o f t w a r e
P A G E 2 8
4.5.5

Subchannels

All subchannels of the data stream are displayed in the Subchannels list.
FIG. 8
The LED under Status signalises if the ISO/MPEG frame of the Audio pro-
gramm can be synchronised.
The Errors column shows the number of errors ocurred for each subchannel.
Under SubChId the ID of the Subchannel is displayed.
In the Type column the component type is shown (DAB audio, DAB+ audio
or data).
Under Prot. Level the selected protection level for the subchannel is dis-
played.
The columns SAD (Start Address) and Size inform you about the start adress
and the size of the subchannel in the ETI data stream. The information is given
in Capacity Units (CU).
Under Rate the data rate and under Mode the coding mode is shown. The
sampling frequeny is displayed under Freq..
In the column Flags shows if an MPEG flag is set.
– O stands for Original
– C stands for Copyright
– P stands for Private
The Service Label of the subchannel can be found under Service.
4.5.6

Decoder Status

Via the Decoder status you get detailed information about the currently
monitored programme.
DISPLAY OF SUBCHANNELS