Table of Contents
Advertisement
W i n d o w s
P C
S o f t w a r e
P A G E 5 2
NOTE
The length of the name must not exceed 8 characters. Special characters and
space characters are not allowed. Please make sure that you use clear-cut
names, otherwise an error message is displayed asking you if you want to
overwrite the already existing preset.
Now, the configuration dialogue is opened to edit the Presets. The current
configuration is always displayed as basis of the Presets, which can be
adapted according to your requirements. The following settings can be saved
in a Preset:
– ETI (see PAGE 35)
– Protocol (see PAGE 36)
– Relay/TTL (see PAGE 37)
FIG. 29
The Edit button allows you to edit the configuration which is currently se-
lected in the list. The current configuration of the system is not changed or
loaded.
With the Delete button you can delete the configuration which is currently se-
lected. A confirmation is required.
FIG. 30
To activate a confirmation selected from the list, please press the Select but-
ton. For safety reasons a confirmation is required.
EDIT PRESET
CONFIRMATION TO DELETE A PRESET
Advertisement
Table of Contents
