Table of Contents
Advertisement
Remove the drive backplane.
9.
To replace the component, reverse the removal procedure.
4-bay LFF hot-plug drive backplane
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
If installed, remove the security bezel
3.
Remove all drives
4.
Do one of the following:
5.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
6.
Remove the air baffle
7.
Disconnect all cables connected to the drive cage backplane.
8.
("Remove the security bezel
("Hot-plug
drive" on page 34).
("Access
panel" on page 35).
("Air
baffle" on page 36).
(optional)" on page 27).
Removal and replacement procedures 38
Advertisement
Table of Contents
