Components (Front); Figure 35 Operation Panel (High-Density Drive Enclosure); Table 14 Status And Meanings Of Each Led (Operation Panel (High-Density Drive Enclosure)) - Fujitsu ETERNUS DX500 S4 Operation Manual

1. Component Names and LED Names
High-Density Drive Enclosure

Components (Front)

This section describes the operation panel and the Disk Activity Panel (DAP) in the front of the high-density
drive enclosure.
■
Operation Panel
An operation panel has a DE-ID display and LEDs.
Figure 35 shows the operation panel.

Figure 35 Operation Panel (High-Density Drive Enclosure)

1
2
4
1. DE-ID
The DE-ID (drive enclosure number) of the drive enclosure is displayed.
2. IDENTIFY LED
3. FAULT LED
4. POWER LED
The LEDs turn on or blink to indicate the statuses that are listed below.

Table 14 Status and Meanings of Each LED (Operation Panel (High-Density Drive Enclosure))

LED name
IDENTIFY
FAULT
POWER
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Table 14
3
LED status
(blinks blue)
(amber)
(green)
Copyright 2018 FUJITSU LIMITED
shows the status and meanings of each LED.
Meaning
The installation location of the drive enclosure is identified ac-
cording to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
The drive enclosure is in error status.
DC power is supplied to the drive enclosure.
35
P3AM-7742-12ENZ0