Harmar Mobility Pinnacle SL600 Installation And Service Manual page 23

STEP 11: Reinstall it back on the track. Slide it to about the same position where it
was. Don't tighten it yet.
STEP 13: Use a pencil to mark where the upper bracket is mounted on the track.
STEP 15: Slide the upper bracket off the upper track out of the open 'elbow.'
STEP 17: Slide it back onto the upper track section.
STEP 12: Turn the whole assembly over to allow you to reach the other side.
STEP 14: Use a 9/16" wrench to loosen the two bolts on the upper bracket. Loosen
each about 2 turns.
STEP 16: Flip the upper bracket over.
folding rail Conversion