C. FOLDING RAIL CONVERSION PROCEDURES
STEP 1: Remove the gas strut from the right-hand
stair rail's two ball mounts.
Use a 13 mm wrench to remove both ball mounts from the link arm and fork.
Take both ball-ends out and set them aside. Leave the jam-nuts on them.
STEP 2: Remove the shoulder bolts for the link arm.
Use a 3./16" Allen wrench to remove the link bolt
from the lift arm.
STEP 3: Catch the link and set it aside. Be careful not to
damage the paint.
To remove the ball mounts, remove the wire retainer clips that hold them on. Pull
the ball-ends straight-up to remove.
folding rail Conversion
Right-handed stair rail.
THESE TWO
THESE TWO
Ball mounts,