Harmar Mobility Pinnacle SL600 Installation And Service Manual page 22

folding rail Conversion
STEP 4: Use a 1/4" Allen wrench to remove the shoulder bolt that the lift-arm pivots from.
STEP 6: To remove the lift arm from the slider shoulder-bolt, insert a 3/16" Allen wrench
into the shoulder bolt of the lower bracket.
STEP 8: Flip the lift-arm over and reinstall the shoulder
bolt with its jam-nut.
STEP 10: With the 'elbow' of the folding track 'bent, ' slide the hole lower slide-bracket
off the lower track out of the opening from the 'elbow. ' Flip it over so the black plastic is
toward the floor.
STEP 5: Remove the shoulder bolt that the fork pivots
from.
STEP 7: Remove the shoulder bolt and jam-nut from the
lift arm.
.
STEP 9: Use a 1/2" socket to loosen the two nuts that hold the lower slide-bracket to
the lower track. Don't remove them, only loosen about two turns.