Switching To "Measuring Only" Mode - Siemens SIMATIC SM 335 Manual

5.3.1

Switching to "Measuring Only" mode

Restrictions
The parameters for
with system function 55 WR_PARA. All parameters must be passed simulta-
neously.
Data Record 1
The SM 335's dynamic parameters for "Measuring Only" mode are forwarded in
data record 1.
Note
The parameters, which you transfer in data record 1 in order to switch to
"Measuring Only" mode, must be identical with the parameters you transferred for
Free Cycle or Conditional Cycle mode, with the exception of byte 11.
Table 5-4
Byte
0
1
2
3
4
5
6
7
8
9
10
11
12
13
SM 335 – High-Speed Analog Input/Output Module for the SIMATIC S7-300
6ES7 335-7HG00-8BA1
"Measuring Only" mode
SM 335 data record 1 for "Measuring Only" mode
Dynamic Measuring Cycle Control
Special SM 335 Operating Modes
can be passed to the SM 335 only
Content
As in Table 3-11
As in Table 3-11 As in Table 3 11
5-15