Siemens SIMATIC SM 335 Manual page 69

Table 3-17
Byte
8
1)
9
1)
10
1)
11
1) In comparator mode 0, bytes 9 to 11 are not assigned.
SM 335 – High-Speed Analog Input/Output Module for the SIMATIC S7-300
6ES7 335-7HG00-8BA1
Interrupt triggered by comparator
Cause of hardware interrupt (see Figure 3-10) = 2#0000 0010
Comparator time [ms]
The comparator time is set in byte 10 of the parameter assignment data re-
cord DR1 (see Subsection 5.2.2).
Low-order byte measuring value of Comparator 2
High-order byte measuring value of Comparator 2
Data Exchange with the SM 335
Content
3-31