Parameter Groups List - ABB DCS550 Manual

154
Type:
A short code shows the data type:
I = 16-bit integer value (0, ..., 65536)
SI = 16-bit signed integer value (-32768, ..., 32767)
C = text string (ENUM)
Volatile:
Y = values are NOT stored in the flash, they will be lost when the drive is de-energized
N = values are stored in the flash, they will remain when the drive is de-energized

Parameter groups list

This chapter explains the function and valid values or selections for all parameters. They are arranged in
groups by their function. The following table gives an overview of all parameter groups:
Group Description
10 Start / stop select
11 Speed reference inputs
12 Constant speeds
Analog inputs
13
14 Digital outputs
15 Analog outputs
16 System control inputs
19 Data storage
20 Limits
Start / stop
21
22 Speed ramp
23 Speed reference
24 Speed control
Torque reference
25
26 Torque reference handling
30 Fault functions
31 Motor temperature
34 DCS Control Panel display
40 PID controller
Current control
43
44 Field excitation
45 Field converter settings
50 Speed measurement
Fieldbus
51
52 Modbus
61 Winder control
62 Diameter adaption
63 Tension torque
Write selection
64
66 Winder program control
83 AP control
84 AP
85 User constants
AP outputs
86
88 Internal
90 Receiving data sets addresses
92 Transmit data sets addresses
97 Measurement
Option modules
98
99 Start-up data
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e