Setting The Dscp Value For Ipv6 Pim Messages; Displaying And Maintaining Ipv6 Pim - H3C S5500-EI Configuration Manual

Switch series
Hide thumbs Also See for S5500-EI:
Table of Contents

Advertisement

Setting the DSCP value for IPv6 PIM messages

IPv6 uses an eight-bit Traffic class field (called ToS in IPv4) to identify type of service for IP packets. As
defined in RFC 2474, the first six bits contains the DSCP priority for prioritizing traffic in the network and
the last two bits are reserved.
To set the DSCP value for IPv6 PIM messages:
Step
1.
Enter system view.
2.
Enter IPv6 PIM view.
3.
Set the DSCP value for IPv6
PIM messages.

Displaying and maintaining IPv6 PIM

Task
Display the BSR information in the
IPv6 PIM-SM domain and locally
configured C-RP information in
effect.
Display information about IPv6
unicast routes used by IPv6 PIM.
Display the number of IPv6 PIM
control messages.
Display the DF information of IPv6
BIDIR-PIM.
Display information about
unacknowledged graft messages.
Display the IPv6 PIM information
on an interface or all interfaces.
Command
system-view
pim ipv6
dscp dscp-value
Command
display pim ipv6 bsr-info [ |
{ begin | exclude | include }
regular-expression ]
display pim ipv6 claimed-route
[ ipv6-source-address ] [ | { begin |
exclude | include }
regular-expression ]
display pim ipv6 control-message
counters [ message-type { probe |
register | register-stop } |
[ interface interface-type
interface-number | message-type
{ assert | bsr | crp | graft |
graft-ack | hello | join-prune |
state-refresh } ] * ] [ | { begin |
exclude | include }
regular-expression ]
display pim ipv6 df-info
[ rp-address ] [ | { begin | exclude
| include } regular-expression ]
display pim ipv6 grafts [ | { begin
| exclude | include }
regular-expression ]
display pim ipv6 interface
[ interface-type interface-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
417
Remarks
N/A
N/A
Optional.
By default, the DSCP value in IPv6
PIM messages is 48.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5500-si

Table of Contents