Ipv6 Pim-Ssm Configuration Example - H3C S5500-EI Configuration Manual

00001. RP Address: 6001::1
MID: 0, Flags: 0x2100000:0
Uptime: 00:05:12
RPF interface: Vlan-interface103
List of 2 DF interfaces:
1: Vlan-interface300
2: Vlan-interface400

IPv6 PIM-SSM configuration example

Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and one or more receiver hosts exist in each stub network. The entire PIM domain is
operating in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
The SSM group range is FF3E::/64.
MLDv2 runs between Switch A and N1 and between Switch B/Switch C and N2.
Figure 109 Network diagram
Device
Switch A
Interface IPv6 address
Vlan-int100 1001::1/64
Vlan-int101 1002::1/64
Device
Switch D
444
Interface IPv6 address
Vlan-int300 4001::1/64
Vlan-int101 1002::2/64