About This Manual Related Documentation In addition to this manual, each H3C S5500-EI Series Ethernet Switches documentation set includes the following: Manual Description H3C S5500-EI Series Ethernet It provides information for the system Switches Installation Manual installation. H3C S5500-EI Series Ethernet...
Page 4
Part Contents Introduces the commands used for configuring IPv4 12 IPv4 Routing routing, static routing, RIP, OSPF, IS-IS, BGP, and route policy. Introduces the commands used for configuring IPv6 13 IPv6 Routing routing, static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+. Introduces the commands used for configuring IPv6 14 IPv6 application, IPv6 tunneling, and so on.
Page 5
Part Contents 30 System Maintaining Introduces the commands used for daily system and Debugging maintenance and debugging. Introduces the commands used for NQA and the 31 NQA related configuration. Introduces the commands used for VRRP and the 32 VRRP related configuration. Introduces the commands used for SSH and the 33 SSH related configuration.
Page 6
Convention Description Optional alternative items are grouped in square brackets [ x | y | ... ] and separated by vertical bars. One or none is selected. Alternative items are grouped in braces and separated by { x | y | ... } * vertical bars.
Need help?
Do you have a question about the S5500-EI Series and is the answer not in the manual?
Questions and answers