H3C S5500-EI Configuration Manual page 360

Field
Multicast Address
S
QRV
QQIC
Number of Sources
Source Address( i )
MLD report message
A host sends an MLD report message to report the current multicast listening state.
MLD report message format.
Figure 86 MLDv2 report message format
Table 10 MLDv2 report message field description
Field
Type = 143
Description
•
This field is set to 0 in a general query message.
•
It is set to a specific IPv6 multicast address in a
multicast-address-specific query message or
multicast-address-and-source-specific query message.
Flag indicating whether a router updates the timer for suppression after
receiving a query message.
Querier's Robustness Variable.
Querier's Query Interval Code.
•
This field is set to 0 in a general query message or a
multicast-address-specific query message.
•
This field represents the number of source addresses in a
multicast-address-and-source-specific query message.
IPv6 multicast source address in a multicast-address-specific query
message. (i = 1, 2, .., n, where n represents the number of multicast
source addresses.)
Description
Message type. For a report message, this field is set to 143.
341
Figure 86 shows the