Step
2.
Enter public network PIM view
or VPN instance PIM view.
3.
Disable the switchover to SPT.
Configuring BIDIR-PIM
BIDIR-PIM configuration task list
Task
Enabling PIM-SM
Enabling BIDIR-PIM
Configuring an RP
Configuring a BSR
Configuring an admin-scope zone
boundary
Configuring PIM common features
Configuration prerequisites
Before you configure BIDIR-PIM, complete the following tasks:
Configure a unicast routing protocol so that all devices in the domain can reach each other.
•
Determine the IP address of a static RP and the ACL that defines the range of the multicast groups
•
to which the static RP is designated.
Determine the C-RP priority and the ACL that defines the range of multicast groups to which each
•
C-RP is designated.
Command
pim [ vpn-instance
vpn-instance-name ]
spt-switch-threshold infinity
[ group-policy acl-number
[ order order-value] ]
Configuring a static RP
Configuring a C-RP
Enabling auto-RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring a BIDIR-PIM domain border
Configuring global C-BSR parameters
Configuring C-BSR timers
Disabling BSM semantic fragmentation
Enabling administrative scoping
Configuring administrative scoping
Configuring C-BSRs for each admin-scope
zone and the global-scope zone
164
Remarks
N/A
Optional.
By default, the device switches to the
SPT immediately after it receives the
first multicast packet.
Remarks
Required.
Required.
Required.
Use any approach.
Optional.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.