Wiring - Mitsubishi Electric FR-E720-0.1K Instructions Manual

3.2

Wiring

Use the network connection cable which supports 12.0Mbps communication.
(1) Strip off the sheath of the PROFIBUS communication dedicated cable and wind wires and shield cables
to use. If the length of the sheath pealed is too long, a short circuit may occur among neighboring wires.
If the length is too short, cables and shield cables might come off.
Cable stripping size
REMARKS
Information on bar terminals...recommended product (as of September, 2006)
Terminal Screw Size
M2
Bar terminal crimping tool: CRIMPFOX ZA3 (Phoenix Contact Co., Ltd.)
When using the bar terminal (without insulation sleeve), use
care so that the twisted wires do not come out.
Wire the stripped cable after twisting it to prevent it from
Approx 5mm
becoming loose.
(Do not solder it.)
Use a bar type terminal as required.
Cable Size
With insulation
2
(mm )
sleeve
0.3 to 0.5 Al 0,5-6WH
Bar Terminal Model
Without insulation
sleeve
A 0,5-6
WIRING
3
Maker
Phoenix Contact
Co.,Ltd.
13