PPO TYPE SUPPORT SPECIFICATION
7.5
Buffer Memory Details
The following indicates the buffer memory details of the Profibus profiles.
(1) PKW
Name
Bit
PNU
0 to 10 PNU number
SPM
11
PKE
AK
12 to 15
0 to 7
IND
8 to 15
46
Not used (0 is set)
[Command request]
Value
0
No task
1
Parameter value is requested (read request)
2
Parameter value (word) is changed (write request)
6
Parameter value (array) is requested (read request)
7
Parameter value (array word) is changed (write request)
Other than the above Non-supported
[Command response]
Value
0
No response (Busy status)
1
Parameter value (word) is transferred.
4
Parameter value (array word) is transferred.
Command execution error (error number is stored into PWE
7
(Refer to page 47))
Other than the above Non-supported
Reserved area for extension (0 is set)
Sub-Index number
At command request, set this number when AK = "6, 7".
Definition
Operation
Operation