Safety Instrumented Systems - Emerson Rosemount 3051SF Series Quick Start Manual

June 2016
Using the Field Communicator
Fast Keys
3, 4, 1, 1, 1, 3
Using the transmitter zero adjustment button
Push and hold the zero adjustment button for at least two seconds but no longer
than ten seconds. This procedure is to adjust the lower range point (i.e. the
pressure value represented by 4 mA).
Figure 9. Transmitter Adjustment Buttons
PlantWeb
A
A. Zero
B. Span

3.0 Safety instrumented systems

For safety certified installations, refer to the "Advanced HART Diagnostic Suite"
section of the Rosemount 3051S
and system requirements specific to safety instrumented systems.
Steps
1. Equalize or vent the transmitter and connect Field Communicator.
2. At the menu, input the Fast Key sequence.
3. Follow the commands to perform a zero trim.
B
Reference Manual
Quick Start Guide
for installation procedures
13