Taking Individual And Multiple Recordings - Commtest Instruments vbBalancer Instrument Reference Manual

5. To take an individual recording, highlight the parameter set
that you wish to record. If you want to record all parameter
sets at a location, highlight the location. The recordings will
be taken one after the other in the sequence that they
appear in the instrument.
6. To start the first recording press
sensor will take a short time to settle before recording
begins.
When the recordings are finished the instrument stores them to the
correct measurement location and returns you to the Record Review
Menu. To take additional recordings, select another parameter set
(or select a location to record all parameter sets under that location)
and repeat this process from step 5.
Taking Individual and Multiple
Recordings
You can choose to record all parameter sets at a location or select
the parameter sets individually. This allows you to selectively record
data, or speed up data collection by reducing the number of key
presses needed to take multiple recordings at a single location.
To record an individual parameter set, highlight it and press
•
to begin recording.
90 Section 9: Taking Recordings
The instrument and