Reviewing Previous Balancing Jobs - Commtest Instruments vbBalancer Instrument Reference Manual

Use the left-hand arrow keys to highlight one of the trim
•
weights you want to remove then press
Keep. The calculator will re-calculate the suggested
weight/angle accordingly. You can experiment with different
remove/keep combinations by repeating this process (to add
a subtracted weight back to the calculator press
When you are satisfied with the suggested weight calculation
•
press
any trim weights, replace any removed weights before
continuing.

Reviewing Previous Balancing Jobs

From the Main Menu press
•
Machine.
Use the left-hand arrow keys to highlight a machine. All
•
balancing jobs associated with that machine will display in
the right-hand Recordings column.
Press the right-hand arrow key
•
column; a black border will appear around it indicating that
you can now browse through the recordings.
to continue. To exit the menu without combining
Balance then
select the Recordings
Section 4: Balancing Rotors
Remove or
again).
Select
47