Copying Machine Structures; Renaming Machine Structures - Commtest Instruments vbBalancer Instrument Reference Manual

Select the machine, point or location where you want to add
•
the new structure then press
creation icons.
Press the appropriate keys beside each icon to create that
•
item.

Copying Machine Structures

You can copy an entire machine or just part of its structure, such as
a point or parameter set, and add the copied items to other
machines.
Note: Only the machine structure is copied when a new machine is
created in this way - recordings are not copied.
From the Main Menu press
•
If no machines are displayed press
•
visible.
Use the left-hand arrow keys to select a machine. To make
•
the points and other lower level items visible press
repeatedly.
Highlight the item you wish to copy then press
•
Copy.
Use the on-screen arrows to choose where your copied item
•
will be pasted then press

Renaming Machine Structures

Note: The default locations (horizontal, vertical etc) cannot be
renamed. If you want to rename a location from horizontal to vertical,
say, simply create a new vertical location on a point and copy any
required parameter sets from the horizontal location, then delete the
horizontal location.
From the Main Menu press
•
100 Section 10: Creating, Editing and Deleting Items
to display the machine
Review Vibration.
to make them
Paste.
Review Vibration.
then