Adding Structures To Existing Machines - Commtest Instruments vbBalancer Instrument Reference Manual

To assign the default parameter set to this location press
•
, or to create a new parameter set press
parameter set will appear at the top of the list ready for
editing.
To rename this parameter set press
•
name for this parameter set then press
Edit the other parameters as required. To assign a different
•
sensor press
otherwise press
Changing the sensor
To assign a different sensor press
•
press Change Sensor opposite your measuring channel and
select a different sensor. (To define a new sensor press
Create New Sensor. See Defining and Editing Sensors on
page 101 for more information.)
Press
•
If required, press the left-hand key beside your chosen
•
channel so the text changes to 'Enabled' then press
twice to return to the Record Review Menu.

Adding Structures to Existing Machines

From the Main Menu press
•
If no machines are displayed press
•
visible.
Use the left-hand arrow keys to select a machine and press
•
repeatedly to expand the machine so that its points and
other lower level items are made visible.
and refer to the sub-heading below,
to return to the Record Review Menu.
Select as Default.
Section 10: Creating, Editing and Deleting Items
Edit Name. Enter a
Sensor Setup then
Review Vibration.
to make them
The new
99